ERROR INFORMATION
During normal operation, the device can detect some malfunctions that do not depend directly on its
configuration but may compromise correct operation. These malfunctions are signalled on the display
as operating errors, through the central digits:
I
NFORMATION ON THE
DISPLAY
Until the problem is resolved, the functions of the device are blocked. Users can exit the error screen by
pressing the
or
minute of inactivity on the device, the error display screen is shown again.
The error will only stop being displayed when it has been resolved. Contact the installer.
Other information
I
NFORMATION ON THE
DISPLAY
For further information, see the ETS technical configuration manual, which can be downloaded from the
product page of the
pag. 16
Warning of lack of KNX BUS connection. This malfunction blocks all
communication on the BUS, and therefore all BUS signalling or command
functions. The KNX BUS connection must be checked to restore correct
operation.
button keys to return to displaying the normal screens of the device. After a
ETS DOWNLOAD IN PROGRESS INFORMATION: this information is
shown on the display while the ETS application is downloading; no
operation on the device is possible by pressing the button keys. The
device is restarted at the end of the download, restoring normal operation.
PROGRAMMING MODE STATUS: indicates the activation (On) or
deactivation (OFF) of the device physical address programming mode. If
an installer is not actively performing configuration, it is possible to return
to the main screen by holding down (>5 seconds) the
buttons simultaneously or, with OFF status, leaving the device inactive
with no user acting on the push-buttons for at least 1 minute.
ETS APPLICATION DELETION INFORMATION: indication that the
application has been deleted and a new download is necessary via the
ETS configuration software. It will be necessary to consult the installer to
resolve this issue.
www.gewiss.com
site, and consult the dedicated section.
M
ALFUNCTION DETECTED
M
EANING OF THE INFORMATION
and
push-