Name Of Parts - LEGALLAIS HB300 Manuel De Mise En Service, D'opération Et D'entretien

____________________________________________EN________________________________________8
internally and by a thick polyurethane insulation layer having large efficiency externally, and the latter
is covered by plastic surface of the appliance. The pipe radiator, controlling indicator anode electrics
and magnesium indicator anode located on the closing cover are placed on a horizontal axle
common with the closing cover.
The condensate water discharge pipe branch is located in the rear part of the circle-shaped
tray above. The control panel equipped with display is located in the front part. All the other parts of
the heat pump circuit are located above the storage tank according to a precisely planned order,
which produces optimal operation, reduced vibration and noise emission.
The following parts are placed under an easily accessible and adequately insulated plastic
coverage: compressor, thermostatic expansion valve, evaporator, fan ensuring adequate air flow and
all the other parts displayed on Figure 2.7.-1.
3.2.

Name of parts

Air Outlet
Filter
Evaporator
Fan Assy
Junction Box Cover
Rear Cover
Junction Box OUTSIDE USE
Heat pump system
Electric heat cover
REMARK
All the figures in this manual are for explanatory purpose only. They may be slightly different
from the heat pump water heater You have purchased (depending on product model). The actual
shape shall prevail.
Figure 2.7.-1.
Hot water pipe branch connection G3/4
Circulation pipe branch connection G3/4
Cold water branch connection G3/4
Figure 2.7-2.
Air Inlet
Top cover
Electric control box
Compressor
Front Cover
Display