Edger Operating Safety - Maruyama M27QC QC-E Manuel Du Propriétaire/De L'utilisateur

Edger Operating Safety

1. THIS EDGER CAN CAUSE SERIOUS INJURIES.
Read the instructions carefully. Be familiar with all
controls and the proper use of the Edger.
2. Make sure the 3 mm hex wrench has been
removed from the gearcase and boss adapter
before you start the engine.
3. Inspect your work area before you begin. Remove
objects such as broken glass, nails, wire and rocks
which can become dangerous projectiles if thrown
by the Edger. Remove string, rope or similar materi-
als which can become entangled in the Edger head.
4. This Edger will throw objects and cut. Keep chil-
dren, bystanders and animals outside a 50 ft.
(15m) radius from the operator and Trimmer.
Beyond the 50 ft. (15 m) there still may be a risk
of injury to bystanders from thrown objects. It is
recommended that bystanders wear eye protec-
tion. A thrown object can ricochet.
50 ft. (15 m) minimum
5. If you are approached while operating the Edger,
stop the engine and Edger blade rotation.
6. Never allow children to operate the Edger.
7. Use the Edger only in daylight or good artificial
light.
8. Never operate the Edger without proper guards or
other protective safety devices in place.
9. Do not put hands or feet near or under any rotating
parts. Keep clear at all times. Keep all parts of
your body away from the rotating Edger blade and
hot surfaces such as the muffler.
10. Keep firm footing and balance Do not overreach.
11. Use the right tool for the job. Do not use the
Edger for any job that is not recommended by
MARUYAMA.
— US-6 —