Publicité
Les langues disponibles
Les langues disponibles
Installation and operation, Service
If installation was unsuccessful: see section 1.1.
EN
Note:
Connection cables in various lengths can be purchased from Rittal.
5.4
Configuration
Once installation is complete, you can check the status of the ISDN unit on the CMC III PU website
and configure the recipients for text messages.
In the left-hand section of the overview window (navigation section), click on the Processing
Unit entry and in the right-hand section (configuration section), click on the Observation tab.
In the configuration section, open the "System" level, followed by the sub-level "V24 Unit (V24
Port)".
Ensure that the entry "ISDN Unit OK" appears in the Message field, and the entry "OK" appears
in the Status field.
Next, configure the recipients for text messages and set up appropriate alarms in the alarm con-
figuration for status changes which will trigger the sending of text messages.
For any required software updates, please visit www.rittal.com or contact Rittal Service (see
section 6)
6
Service
For technical queries, please contact:
Tel.: +49(0)2772 505-9052
E-mail: info@rittal.de
Homepage: www.rittal.com
For complaints or service requests, please contact:
Tel.: +49(0)2772 505-1855
E-mail: service@rittal.de
8
Rittal CMC III ISDN unit
Publicité
