Supplementary Heating (Zp 1); Pressure Consistency (Zp 2); Filter Monitoring (Zp 2); Enocean Wireless (Plug-In Module E-Sm) - Maico WR 310 Notice De Mise En Service Et D'entretien

UK | 6 Settings main menu
6.11 Supplementary heating
(ZP 1, switching contact HP)
Additional circuit board "ZP 1" = accessory for
310/410 320/470
ventilation units:
160 Flat 300 Flat
.
main circuit board with switching contact „HP"
on
310/410 320/470 160 Flat 300 Flat
Trio
.
Parameter
Supplementary
heating
Hysteresis
setpoint temperature
For additional information about the
i
supplementary heating  Chapter 9.4.
Supplementary heating, e.g. using an electric
or hydraulic heat register. The Hysteresis
setpoint temperature parameter can still be
set for adjustment purposes. The hysteresis
relates to the room setpoint temperature set in
the short code menu  Chapter 5.3.

6.12 Pressure consistency (ZP 2)

Additional circuit board "ZP 2" = accessory for
ventilation units:
310/410 320/470
160 Flat 300 Flat
.
Parameter
Operation with con-
stant pressure
Reference
Reference volumetric
flow
Reference pressure
For additional information about control with
constant pressure  Chapter 10 or accesso-
ries instructions.
78
170
Option for connecting to
Setting
no / yes
0.1 ... 0.3 ... 1 K
170
Setting
no / yes
Pressure / volumes
0 ... 200 ... 500 m³/h
10 ... 200 Pa

6.13 Filter monitoring (ZP 2)

through differential pressure
measurement
Additional circuit board "ZP 2" = accessory for
ventilation units:
310/410 320/470
160 Flat 300 Flat
.
Parameter
Filter monitoring
Permissible delta p
For additional information about filter
monitoring  Chapter 10 and accessories
instructions.
6.14 EnOcean wireless
(plug-in module E-SM)
Parameter
EnOcean wireless
Teach-in mode
Unit list
Unlearn units
* Here you can either unlearn all or
just individual EnOcean wireless units.
For additional information about the
i
EnOcean wireless plug-in module
E-SM  Chapter 7.7 or accessories
instructions.
6.15 KNX
(plug-in module K-SM)
Parameter
KNX
For additional information about the KNX
plug-in module K-SM  accessories instruc-
tions.
170
Setting
no / yes
10 ... 80 ... 200 %
Setting
no / yes
inactive / active
inactive / active
*
Setting
no / yes