Dolphin 12V25A Notice Technique page 5

OPERATING INSTRUCTIONS
> ABSORPTION
• LED is orange
• Batteries are in absorption MODE (6 hrs max.)
> EQUALIZATION
• LED is flashing orange
• Batteries are in equalization mode (4 hrs max.)
> FLOATING
• LED is flashing green
• Batteries charged and in floating mode
> SILENT NIGHT MODE
• SILENT NIGHT MODE is active by pushing the front push-button, during a minimum of 3 sec.
• SILENT NIGHT MODE is OFF by pushing a new time, on the same push-button
• SILENT NIGHT MODE is automaticaly OFF after a periode of 10 hrs.
• LED is flashing fast green
• The charger is in silent night mode
• Internal fan is automaticaly OFF
• LED is flashing fast orange
• The charger is in stand-by mode (over-temperature protection)
> TEMPERATURE FAULT
• LED is flashing red
• Internal temperature fault
• The charger is in stand-by mode for 30 sec. (min.)
• Check the installation and climatic conditions
• Check the internal fan is operational
• Check charger's confinement
> OUTPUT VOLTAGE FAULT
• LED is red
• Faulty output voltage
• The charger is in stand-by mode for 30 sec.
• Check state of electronic card
> OUTPUT FUSE FAULT
• LED is red
• Faulty output fuse
• Check battery connections
• Check the status of the fuse box
Notice BEN.1225/40 rév 01
5