Publicité
Les langues disponibles
Les langues disponibles
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the
values indicated on the descriptive plate.
- Make sure that every control knob is positioned on 0.
- Check that neither the cord nor the plug are damaged
- Unwind completely the electric power cable and connect it in a plug connected
with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Thermostat (n°1 on picture)
Orange pilot light
(n°2 on picture)
Putting on
Turn on the thermostat control knob (n°1 on picture) on maximum position dur-
ing 15 minutes : the orange pilot light (n°2 on picture) ignites. The machine is
warming up. Once orange pilot light (n°2 on picture) is off, plates are hot.
Temperature setting
Set the temperature by positioning the thermostat (n°1 on picture) to the desired
temperature.
Stopping the appliance
Set the thermostat control knob (n°1 on picture) on 0: the appliance is no longer
functioning.
Let the device cool.
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him
the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.
Function
On/Off + Temperature setting
Machine is heating (pilot light on)
Temperature reached (pilot light off)
15
Publicité
