Gastros Switzerland InductWarm 130+ Notice De Montage Et De Fonctionnement page 24

Power Supply
You can chain up to three InductWarm
connect them with the power cord (article 6 01 10x 00) to a power outlet 110V/230 V (16A). When using a power
outlet with only 10A you can chain up to two InductWarm
element is 800W.
Installation
Remove all remaining packaging and check your InductWarm
the appliance if there are any signs of damage.
To make transport easier in the future, please keep the original packaging.
Power on the InductWarm
the green LED of the power switch and of the power select button are illuminated and the first LED on the front
control panel is blinking (stand-by mode).
Operation
®
Your InductWarm 130+ can be controlled in different ways:
Using the internal control unit:
Repeated pressing of the power selection button lets you cycle through the different warming zones 1, 2, 3, 4 and
24
®
130+ elements with the power chain cable (article 6 10 1xx 00) and
®
130+ by using the power switch on the bottom of the device. The device is on, when
®
130+ devices. The max. power consumption of one
®
130+ device for external damage. Do not start up