Gastros Switzerland InductWarm 130+ Notice De Montage Et De Fonctionnement page 23

Accessories
Cabling (Example)
The wiring of the power (POWER-Side) is independent of the wiring of the operation cables (BUS-Side). Each
element must be connected to the electrical power either direct by a power cord (3) like the devices A and D or
indirect by a power chain cable (8) like the devices B and C.
In the example above, the induction units A and B are connected with the BUS-cable (7) and controlled by one
control unit (4). These two elements have the same power level. The devices C and D are controlled individually
by an own external control device. The infrared remote control (5) can be used to control all individual elements.
23