Publicité
Les langues disponibles
Les langues disponibles
GO TO VAPAMORE.COM TO SEE THE MR-750 OTTIMO INSTRUCTIONAL VIDEO
Once unpacked the only items that need to be installed are the cord hooks and the
storage basket. All the necessary tools and hardware are included to install these items.
Fig.1
Cord
Hook
Fig.2
Storage
Basket
If the storage basket is not being installed make sure to use the 4 supplied
!
Allen head screws to plug the storage basket mounting holes in the steamer housing.
This will prevent water or debris from entering the steamer housing.
!
Vapamore
!
The Ottimo
!
!
machine to cool down before removing tank cap or when changing accessories.
!
operation. Do not tip or tilt the steam cleaner during use.
GETTING STARTED
CORD HOOKS
There are two supplied cord hooks that are mounted
by threading the cord hooks onto the threaded studs
located on the back of the steamer housing. The cord
hooks rotate by pulling outward from the steamer
then twisting to rotate. Use this rotate function to
easily remove the power cord and to position the
hooks for cord storage. Use the Velcro cord strap to
secure the cord during transport. (Fig.1)
STORAGE BASKET
The basket is secured to the main steamer body using
the 4 supplied Allen head style screws and rubber
Allen
Screw
washers. Align the basket screw hole locations and
with the rubber washer betwwen the basket and the
Rubber
washer
steamer housing, insert the Allen head screws loosely
until all screws are in place. Once all screws are in place
(Fig.2)
if over pressure or over temperature is detected.
Publicité
