Homak GW00550160 Manuel Du Propriétaire Mode D'emploi page 3

ASSEMBLY
STEP 1
C
Attach the Bench Legs (B)
to the mounting rails onto
the Bench Top (A)
B
2
You will use two (2) Bolts
(E) and two (2) nuts (F)
to attach each leg to the
Bench Top.
See close-up diagram (1)
A
1
for an installation image.
1
STEP 2
F
Attach the Shelf (C) to the
mounting rails onto the
3
Bench Legs (B).
You will use two (2) Bolts
E
(E) and two (2) nuts (F)
to attach each leg to the
Shelf.
2
See close-up diagram (2)
F
for an installation image.
STEP 3
Align the 3 Drawers (D) into
the glides on the Bench
Top.
D
E
The Drawer stop in close-
3
up diagram (3) may need
to be pushed to allow the
drawer to pass, but will
then keep the drawer in the
glides on future opening.
- 3 -