PNI Hunting 400C Manuel De L'utilisateur page 6

EN
FAST CONFIGURATION WITH TRAILCAMERA APP
You can send basic settings to the camera, directly from the TrailCamera mobile
application, to quickly configure it, or to receive emails. Just enter a SIM card with SMS,
active Internet and no PIN (tested in a phone in advance) and turn on the camera (the
switch is on ON position) and check as indicated above for a signal in the camera.
- Add in the app the phone number of the SIM inside the camera.
- Copy the settings in the image below and only modify your phone number and email
address with your own.
- Send the settings to the camera by pressing the Send button.
- The camera will respond with an SMS "SMS commands executed successfully!"
- Give the command "Get a picture" from the application and you will receive the same
SMS and an email with the photo taken by the camera.
- If it does not work, it means the product does not have the GSM signal, the Internet
or the correct settings made. Check the settings again and remove the camera in the
open field where you have at least 2 signal lines. Please also carefully check the camera
settings.
6
User manual