ON/OFF
ON. Choose the ON option to set the time you want the camera to send
you the daily report
Note: When this option is enabled, the camera will no longer send photos
Daily
by e-mail. The only remaining active position is sending this report.
Report
What is the daily report: Device IMEI Number, CSQ (Signal Strength): 0 ~
31, ID Camera, Temperature, Date & Time, Battery Left Volume, SD Card
Info, Total Pics Taken by Cam (Total photo taken by the camera), Pics Sent
by Cam (Total photo sent by camera)
SIM PIN
You can ignore the description below if your SIM has already been activated and has
no PIN lock code (Menu becomes gray / inactive).
(The "Pls input PIN-Code" phase will not appear after searching for the signal if your
SIM is initialized and does not have an active PIN)
1. The camera will check if the inserted SIM card is activated while searching for
signals in the "Test" mode;
2. If the SIM is not activated and has an active PIN code, "Pls input PIN-Code" will
appear on the screen after searching for the signal;
3. Then "SIM PIN" will become configurable on the "3G" menu page;
4. Enter your PIN in "SIM PIN"; the camera will turn off automatically. The camera will
automatically initiate the SIM card while searching for the signals when you restart
the camera after entering the PIN code.
Notes:
•
"Pls input PIN-Code" will be displayed again if the wrong PIN is entered;
•
Please re-try the PIN as if you see "Pls input PIN-Code" after searching for the
signal;
•
The SIM is normally limited to being initialized 3 times; it will be blocked if the PIN
entered is wrong during these attempts 3 times. So, we suggest you double-check
your PIN before attempting again.
•
Insert the SIM card into your phone to unlock it using the PUK code after a 3-fold
attempt of activation based on the above steps.
ON/ OFF
If GPS is ON, GPS information will be printed on the image
Note: If the GPS signal is poor, GPS information will not be displayed until
the GPS signal is stronger.
GPS
Caution: We recommend that you activate the GPS function only when
you are out of buildings.
Inside buildings, this function is not functional, and it may be that the
satellite search procedure lasts a long time.
User manual
17
EN