Fisher & Paykel AquaSmart Instructions D'installation Et Guide De L'utilisateur page 17

Easy touch buttons and LCD screen
These buttons require only a gentle touch to activate.
Touch POWER to activate your AquaSmart™ washer.
1
HIGH EFFICIENCY – this light tells you when 'High Efficiency' mode is recommended, and the
2
button allows you to switch between High Efficiency and Conventional modes (refer to
page 17).
The screen in the middle of the panel will display the wash cycles available (refer to pages
3
27 – 32).
Use the SCROLL buttons to select the wash cycle that best suits your load (refer to page 24).
4
Use the SELECT/TICK button to confirm your selection. (For more information on how to alter
5
wash options refer to page 25).
Touch START – your AquaSmart™ will start to fill with water, and will automatically select the
6
correct water level and wash action for your load. To pause your AquaSmart™ at any time, simply
touch START/PAUSE.
3
Important!
Failure to follow the advice in this User Guide may result in damage to your garments, and
your expectations of wash performance may not be met.
Getting started quickly
4 5
15
EN