Installing The Hose For Extraction Mode - Ore CH60A - T1B Manuel D'instructions

Installation
1. Connect the exhaust air hose (not supplied) onto the hose connection. Affix
Installing the air hose for extraction mode
the hose onto the hose connection using the hose's clamp.
2. Insert the upper end of the exhaust air hose through the wall breakthrough in
such a way that the hose reaches the outside edge of the wall.
In order to keep noise level to a minimum and employ the
Important!
performance of the hood optimally, we recommend using a suitable
exhaust air hose.
12
Preparation