Verifying Wireless Lan Pc Card Driver Installation - Sony VAIO PCWA-C300S Mode D'emploi

Verifying Wireless LAN PC Card driver installation

To verify that the Wireless LAN PC Card driver has been installed
properly, perform the following steps.
Windows Me operating system:
1
Click "Start", point to "Settings", and click "Control Panel".
Control Panel appears.
2
Double-click the "System" icon.
Hint
If the "System" icon is not shown, select "View all Control Panel options".
3
Click the "Device Manager" tab.
4
Click "View devices by type".
5
Double-click "Network adapters".
6
Double-click "Sony 802.11g Wireless LAN Adapter".
The "Sony 802.11g Wireless LAN Adapter Properties" dialog box
appears.
Note
The Wireless LAN PC Card is not working properly in the following cases:
• "Sony 802.11g Wireless LAN Adapter" is shown with an "X" or "!" symbol.
• Double-clicking "Network Adapters" does not display "Sony 802.11g Wireless
LAN Adapter".
• Double-clicking "Other devices" displays "Ethernet Controller".
Click "Sony 802.11g Wireless LAN Adapter" and click "Remove" to uninstall
the driver. Then repeat the installation process.
Remove the Wireless LAN PC Card. Then repeat the installation process.
Click "Ethernet Controller", then click "Remove" to uninstall the driver. Repeat
the installation process.
31