Installation Accessory - mundoclima KJR-120C/TF-E Manuel D'installation Et L'utilisauter

2. Installation accessory

2.1 Select the installation location
Don't install at the place where cover with heavy oil, vapor or sulfureted gas,
otherwise, this product would be deformed that would lead to system malfunction.
2.2 Preparation before installation
1. Please confirm that all the following parts you have been supply.
No. Name
Wire controller
1
Lithium battery
2
Cruciform slot screw M4×25
3
Plastic bolt
4
Installation and owner's manual
5
The connective wires:
6
- 1x Connective wire 6 m.
2. Please filed install the following accessory.
No. Name
Electric cabinet
Wire configured tube
(insulated sheath)
Phillips screwdriver
Slotted head screwdriver
Qty. Remark
1
1
2
This accessory is used when install the
wire controller inside the electric cabinet
2
1
1
Qty.
Universal electric cabinet's specification.
1
Pre-embed it into wall.
Pre-embed into wall, the longest length should
1
not exceeding than 15m.
For install Cruciform slot screw.
For unscrew the bottom cover of wire controller.
37
Remark