cecotec Surface Precision 9500 Smart Healthy Manuel D'instructions page 18

ENGLISH
assistance immediately.
• Should a battery have leaked, do not allow your skin, eyes or
mucous membranes to come into contact with the battery
acid.
WARNING: In case of contact with acid, rinse the affected areas
with abundant fresh water immediately and contact a doctor
as soon as possible.
• Make sure the battery contacts in the device are clean
before inserting batteries; if they are not, clean them.
• Use only the battery type specified in the technical
specifications.
• Always replace all the batteries at the same time. Do not
use different types of batteries or of different capacities.
• When replacing batteries, note the correct polarity (+/-).
• Take the batteries out of the device when they are discharged
or when the scale is not going to be used in a long time.
• Batteries must not be recharged or reactivated, dismantled,
thrown into fire, immersed in fluids or short-circuited.
• This device requires 4 x 1.5-volt batteries, AAA type.
WARNING: If "Lo" appears on the display, batteries need to be
replaced.
How to replace batteries:
1. Open battery compartment on the bottom part of the scale.
2. Remove used batteries.
3. Introduce 4 x 1.5-volt batteries, AAA type. Pay attention to
18 SURFACE PRECISION 9500/9600 SMART HEALTHY