Set Up Of Your Night Vision Device - Num'axes VIS1012 Guide D'utilisation

Note: Once you enter the setup menu, you cannot use power button (A) to turn the device off. Si vous souhaitez éteindre votre appareil, vous devrez ressortir de l'interface de
réglages. If you want to turn the unit off, press and hold the image brightness button
turn it off.
 « - » button, allows you:
- To enter into submenu.
- Is used to lower the back light when you are in the back light setting interface.
 « + » button, allows you:
- To exit the submenu.
- Is used to enhance the back light when you are in back light setting interface.
 « IR » button, allows you:
- To switch the menu when you are in the setup menu interface.
- Can be also used to switch "Daytime LCD brightness" to "Nighttime LCD brighthness".
 Record button (F), allows you:
- To confirm and record the settings.

Set up of your night vision device

 Set up of the language :
- Turn on your monocular. Once appeared NUM'AXES logo on the screen of your device
- Set the desired language highlighted in green.
- After choosing, press the record button "REC" (F) to confirm your choice and return to the main setup menu.
Note: To cancel your choice and exit of the resolution submenu, press the « + » button.
for 3s to return to the review interface first. Then, press and hold power button 3s to
,
press and hold on 3 s the button to enter in menu interface.
25/65