Dedicated Micros 2010 Manuel D'installation page 3

2. Mounting Configuration
Fig.2 Mounting configuration
E
A
C
Enclosure mounting
1. Use bracket arm (E) as a template for marking the position of mounting holes. Remove & drill to
pattern required.
2. Attach bracket arm to wall using rawl plugs and screws provided. ( Assuming masonary wall )
3. Feed cables through bracket exiting down (C) or through (A) wall, via conduit, as req'd. (fig 2)
4. Release screw F to pan housing and screw H for tilt. Position as required for camera coverage
& tighten to secure.
5. An optional Infra red lamp (880/883) may be mounted under the housing.
2010/2015 Installation Manual
Model Shown: Type 2015
H
Option (Type 2015 only)
F
95071 - Wiper Assembly 230v
95072 - Wiper Assembly 110v
95073 - Wiper Assembly 24v
95074 - Wiper Arm Assembly
H003 - Wiper Blade
Page. 2