JVC EXAD KD-NX5000 Manuel D'instructions page 114

Symptoms
• No Disc appears on the monitor.
• No Magazine appears on the
monitor.
• No Files appears on the monitor.
• Reset 08 appears on the monitor.
• Reset 01 – Reset 07 appears on the
monitor.
• The CD changer does not work at all.
• The iPod or D. player does not turn on
or does not work.
• The sound is distorted.
• Disconnect appears on the monitor.
• For iPod: Playback stops.
• No sound can be heard when
connecting an iPod nano.
• No sound can be heard.
• ERROR 01 appears on the monitor
when connecting a D. player.
• No Files or No Track appears on
the monitor.
• Reset 01 – Reset 07 appears on the
monitor.
• Reset 08 appears on the monitor.
• The iPod's or D. player's controls do
not work after disconnecting from this
unit.
114
Causes/Remedies
• Insert a disc into the magazine.
• A disc is inserted upside down. Insert the disc
correctly.
Insert the magazine.
Disc does not include playable files. Replace the
disc with playable files.
Connect this unit and the CD changer correctly
and press the reset button of the CD changer.
Press the reset button of the CD changer.
Reset the unit (☞ [4]).
• Check the connecting cable and its connection.
• Charge the battery.
• For D. player: Update the firmware version.
Deactivate the equalizer either on this unit or the
iPod/D. player.
Check the connecting cable and its connection.
The headphones are disconnected during
playback. Restart playback.
Disconnect the headphones from the iPod nano.
Disconnect the adapter from the D. player. Then,
connect it again.
No tracks are stored. Import tracks to the iPod or
D. player.
Disconnect the adapter from both this unit and
iPod/D. player. Then, connect it again.
Check the connection between the adapter and
this unit.
Reset the iPod or D. player.