Preparation; Selecting Connecting Devices - Anthem LTX 300v Manuel D'instructions

Preparation

2

Selecting Connecting Devices

●
Do not turn on the power until connection is complete.
●
The connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be
connected.
●
This device is used for image projection. Connect to an audio output device such as amplifier and speaker for audio output
from the connected device.
●
The images may not be displayed depending on the devices and cables to be connected.
For HDMI cable (sold separately), only use one that is HDMI-approved.
●
It may not be possible to connect to this unit depending on the dimension of the connector cover of the cables to be
connected.
BD/DVD Recorder
To connect via HDMI terminal (
To connect via video terminal (
16
P18)
To connect via component video terminals (
C /P C /P
Y B B R R VIDEO
S-VIDEO
HDMI 1 HDMI 2 G B R SYNC
P17)
PC
To connect RS-232C terminal
(external control) (
RS-232C
To connect via S-video terminal (
VCR and camcorder
BD/DVD Player
P17)
P50)
P17)