NOTE:
When the battery power is low, the device emits a warning tone and
•
displays a low battery power message.
If the battery is completely discharged, the device cannot be turned on
•
immediately when the charger is connected. Allow a depleted battery to
charge for a few minutes before turning on the device.
If you use multiple applications at once, network applications, or
•
applications that need a connection to another device, the battery will drain
quickly. To avoid disconnecting from the network or losing power during a
data transfer, always use these applications after fully charging the battery.
The device can be used while it is charging, but it may take longer to fully
•
charge the battery.
If the device receives an unstable power supply while charging, the touch
•
screen may not function. If this happens, unplug the charger from the
device.
While charging, the device may heat up. This is normal and should not
•
affect the device's lifespan or performance. If the battery gets hotter than
usual, the charger may stop charging.
After fully charging, disconnect the device from the charger. First unplug the charger
from the device, and then unplug it from the electric socket. Do not remove the battery
before removing the charger. This may damage the device.
NOTE: To save energy, unplug the charger when not in use. You must unplug
the charger from the electric socket when not in use to avoid wasting power.
The device should remain close to the electric socket while charging.
23