Ferroli TE FC 3V Manuel D'utilisation Et D'installation page 37

Register
Command
Address
03/06/16 17
03 18
03
19
03
20
03 21
22
03
23
03
● The minimum interval of data packet is 100 ms. In case of
excessive data in a single data packet, adjust the time interval
appropriately.
● Degrees Celsius: Value=Set temperature x 10. For example, if
the set temperature is 17.5°C, the value written to the register=
17.5 x 10 = 175.
● Currently, the set temperature can be adjusted only with an
accuracy of 0.5 degrees.
● The default status of Valve 1 and Valve 2 depends on the
system state.
Parameter Name
00: Two-pipe cooling and heating
01: Two-pipe cooling
02: Two-pipe cooling + Electric
auxiliary heating
System type
03: Two-pipe heating + Electric
auxiliary heating
04: Two-pipe cooling and heating
+ Electric auxiliary heating
05: Four-pipe
Restore factory
0: General; 1: Restore factory settings
settings
High fan speed
00: OFF; 01: ON
status
Medium fan
00: OFF; 01: ON
speed status
Low fan speed
00: OFF; 01: ON
status
Valve 1 status 00: OFF; 01: ON
Valve 2 status 00: OFF; 01: ON
CAUTION
12
Parameter Range
Default
Value
0
0
0
0
0
0
0