Required Settings Before You Can Use Your Camera; Installing The Drivers, "Camera Setting Utility" And; Sony Usb Camera Viewer - Sony CMR-PC1 USB Mode D'emploi

Required Settings Before You Can Use
Your Camera
Using the supplied install disc, you must first install the necessary
drivers and software on the computer.

Installing the Drivers, "Camera Setting Utility" and

"SONY USB CAMERA Viewer"

This section describes the procedures for installing the drivers required
to connect your camera and the "Camera Setting Utility" software used
for setting your camera and the "SONY USB CAMERA Viewer"
software used for testing any of the camera's functions.
Your camera is designed specially for use with computers with
preinstalled versions of Windows 98, Windows 98 SE, Windows 2000
Professional or Windows Millennium Edition. It cannot be used with
other computers.
1
Turn on the computer without the camera being connected.
2
Insert the CD-ROM into the CD-ROM drive.
3
Click the [Start] button, and then select [Run] to continue.
4
Type "d:\Drivers\USBCam\setup.exe", where "d:\" is the drive
letter of your CD-ROM drive; then click [OK] to start the "SONY
USB CAMERA Drivers and Viewer" installation program.
GB
6