Applications; Product Description - Beper 50.915A Manuel D'instructions

Rechargeable Lint Remover Use instructions

Applications

The lint shaver is designed for the removal of lint, little balls of fuzz, hair or dust from the surface of
textile fabric or furniture upholstery.

PRODUCT DESCRIPTION

1. Protective cover
2. Spacer ring
3. Perforated shaving area
4. Shaving head
5. Rotation pin
6. Ergonomic housing
7. On­/Off switch
8. Lint chamber
9. Connection for charger
10. Charge indicator
11. Power cable
12. Brush
OPERATION Fig. A-B
– Place the item to be treated on a level surface.
– Remove the protective cover from the head. For coarser wool surfaces, the use of the spacer ring
is recommended.
– Use the On­/Off switch to turn the appliance on. The shaving blades inside the shaving head start
rotating. When
they come into contact with the surface of the area to be treated, a distinct noise can be heard. This
is normal.
– Guide the shaving head gently and without exerting any pressure over the fabric to be treated. Lint
and fuzz balls are removed and collected in the lint chamber.
The chamber should always be emptied in good time. If the motor seems to lose power, or if it stops
working completely, the lint chamber may be over­full.
– Turn the appliance off after use.
GENERAL CARE AND CLEANING Fig. C-D-E
Before cleaning the appliance, turn the motor off and remove the batteries from the battery com­
partment.
To avoid the risk of electric shock, do not clean the appliance with water and do not immerse it in
water.
Do not use abrasives or harsh cleaning solutions.
– To empty the lint chamber, slide it out of the appliance in the direction indicated by the arrow. Once
emptied, slide the chamber back into the appliance until it is heard locking into place.
– The exterior housing may be wiped with a slightly damp soft cloth.
– The shaving head can be cleaned as follows:
– Remove the spacer ring and the protective cover from the appliance.
10