General Maintenance; Changing The Light Bulb - Atag OX3211C Mode D'emploi

bulb fitting
unscrew
cover
Leave the oven to cool down before cleaning it manually.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean
the oven door glass since they can scratch the surface, which may
result in shattering of the glass.
• The bulb is located in the back of the oven.
WARNING! Disconnect the oven before touching the bulb to avoid
any electric shock ; leave the oven to cool down if necessary.
- Turn the protective shade to the left a quarter of a turn.
- Unscrew the bulb in the same direction.
The bulb used is a:
- 15 W
- 220 - 240 V
- 300°C
- E 14 screw-fitting bulb
- Change the bulb, then refit the protective shade.
- Plug the oven back in.
Note: It is easier to unscrew the shade and bulb if you wear a rubber glove.

general maintenance

changing the light bulb

GB 19