Grandstream GMC08 Manuel D'utilisation page 3

EN
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not use a third party power adapter.
• Do not expose the device to temperatures outside the
range of 0°C to 55°C (32°F to 131°F) in operation and
-10°C to 60°C (14°F to 140°F) in storage.
• Do not expose the GMC08 at environments outside of the
humidity range of 10-90% RH (non-condensing).
• Do not charge or discharge third party batteries that are
not specified by Grandstream.
• Do not short circuit electrodes.
OVERVIEW
GMC08 is Grandstream's battery charging pack for its mobile
telephony products, including the WP820. It features 8 inde-
pendent slots to fully charge or discharge multiple batteries
simultaneously.
For added flexibility, the GMC08 comes with three charging
capacities for air shipment, storage capacity control and
long endurance. It offers reliable performance and efficiency
thanks to built-in over-voltage, over-charge, over-current, and
short-circuit management as well as leak protection.
GMC08 PACKAGE CONTENTS
1x GMC08
1x 12V,2A
1x Quick Installation
Power Adapter Guide
~1~
GMC08 LED STATUS
LED Description
Red Flashing
Charging
Green Flashing Discharging
Green Solid
Charging or discharging done
Red Solid
Charging or discharging error (high
temperature or extreme temperature or
battery contact error)
LED OFF
No battery detected or battery incom-
patible
CHARGING/DISCHARGING BATTERIES WITH
GMC08
1. Connect one end of the 12V, 2A DC output plug to the
power jack on the device and the other end to an electri-
cal outlet.
2. Insert the batteries with the electrodes in the top right
corner.
3. Slide the battery capacity switch on the top right of the
device to the desired capacity. The device will start charg-
ing/discharging the battery until the level reaches the se-
lected capactiy.
~2~
Battery Capacity
Switch