Philips HQ6900 Serie Mode D'emploi page 9

Masquer les pouces Voir aussi pour HQ6900 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Problem
Possible cause
Reduced shaving
The shaving heads are dirty. You
performance.
have not cleaned the shaver
well enough or you have not
cleaned it for a long time.
Long hairs obstruct the shaving
heads.
The shaving heads are damaged
or worn.
The shaver does
The shaver is not connected to
not work when
the mains.
I push the on/off
slide upwards.
Skin irritation.
Your skin needs time to get
used to the Philips shaving
system.
5
Put the retaining frame back into the shaving unit, push it down (1)
and turn the wheel clockwise (2).
6
Put the shaving unit back onto the shaver.
troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, visit www.philips.com/support for a list of
frequently asked questions or contact the Consumer Care Centre in your
country.
Solution
Clean the shaver thoroughly before you
continue shaving. See chapter 'Cleaning and
maintenance'.
Clean the cutters and guards with the cleaning
brush supplied. See chapter 'Cleaning and
maintenance', section 'Every two months:
shaving heads'.
Replace the shaving heads every 2 years
for optimal shaving results. See chapter
'Replacement'.
Put the mains plug in the wall socket.
Skin irritation during the first 2-3 weeks of use
is normal. After this period, the skin irritation
usually disappears.
EnglisH
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hq6940/33Hq6940/16

Table des Matières