Service And Maintenance - Antari LCU-1S Mode D'emploi

DMX Operation
Making the DMX Connection – Connect the machine to a DMX controller or to one of the
machines in the DMX chain. The machine uses a 3-pin XLR connector for DMX connection,
the connector is located on the front of the machine.
DMX Channel Function
Channel Mode
1

Service and Maintenance

Do not allow the machine to become contaminated.
․
Only use a damp cloth to clean the casing.
․
It is recommended to run the machine on a monthly basis in order to achieve best
․
performance and output condition.
Fuse Replacement
Disconnect AC power before replacing fuse. Only replace fuse with same type
and rating.
Step 1: Disconnect power cord from supply.
Channel
1
9
Value Function
0-4 Off
Output volume from
5-255
1-100%