DeWalt DWP352VS Traduction De La Notice D'instructions Originale page 22

ENGLISH
BELT SANDER
DWP352VS
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.
Technical Data
Voltage V
Type
Power input W
Belt speed m/min
Sanding surface mm
Belt length mm
Belt width mm
Weight kg
Noise values and vibration values (triax vector sum) according to
EN 60745-2-4:
L (emission sound
PA
pressure level) dB(A)
L (sound power level) dB(A)
WA
K (uncertainty for the
WA
given sound level) dB(A)
Vibration emission value a = m/s²
h
Uncertainty K = m/s²
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
20
DWP352VS
Fuses
230 115
Europe
1/2 1/2
U.K. & Ireland
1010 1010
Defi nitions: Safety Guidelines
270–440 235–380
140 x 75 140 x 75
The definitions below describe the level of severity
533.4 533.4 for each signal word. Please read the manual and
pay attention to these symbols.
76.2 76.2
5.0 5.0
92 92
103 103
3 3
2.7 2.7
1.5 1.5
EC-Declaration of Conformity
MACHINERY DIRECTIVE
BELT SANDER
DWP352VS
D WALT declares that these products described
E
under Technical Data are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-4.
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.