Smappee EV Wall Business Guide D'installation Rapide

What's in the box?
EV Wall mounting plate
EV Wall Business
×3 ×3
Screw & plug Small screw QR code Smart Charge
sticker Card
Quick Install Quick Starter
Guide Guide
Smappee EV Wall
Business
Connection diagram
For In case of 3-phase delta (3*230 V),
consult the full manual at
smappee.com/smappee-manuals
or via the QR code:
Manual
Front side Back side
LED Board
B
B
Power Ethernet
supply cable
cable
Distribution Panel
Fixed cable version Socket version
Power Power
MID supply supply
MID
Charge
Charge
L1
Contactor Controller Controller
L2
RCD
L3
CP
N Connect
PE
L1
PE
N
L2
L1 RCD
L3
L2 Contactor
L3 N
Connect
Charging
Ethernet
cable
cable
Power
supply cable
EN
Safety warning
Carrying out electrical work within the home or workplace
can be dangerous and must be conducted according to the
appropriate national safety standards and executed by a
certifi ed electrician.
For safety purposes, it is also necessary to power o
the installation before proceeding with the physical
installation.
For further safety instructions
and more detailed information,
please consult the full manual at
smappee.com/smappee-manuals
or via the QR code:
How to install Smappee EV Wall
Buisness
Prepare the installation. Foresee an ethernet cable
1
with stable internet connectivity, and a power supply
cable between the distribution panel and the EV Wall
Business.
Optional: install Smappee Infi nity in the distribution
2
panel. Consult the Infi nity installation manual
at smappee.com/technical-documentation.
Smart Charging functionality requires the installation of Smappee
Infi nity to measure the grid and solar production.
Fix the mounting plate to the wall with the provided
3
plugs and screws.
4 Attach the EV Wall Business housing to the EV Wall
mounting plate with the provided small screws.
5 Connect the power supply cable, ethernet cable and
charging cable (if applicable) to the EV Wall Business.
See diagrams overleaf. In case of 3-phase delta (3*230 V), please
consult the full manual online.
6 Switch on the power using the circuit breaker.
Download the Smappee App and follow the instructions
7
to confi gure your Smappee charging station. If an
Infi nity installation is already present, make sure to add
the charging station to the existing Smappee location.
Connect the B cable to the B port of the LED board. Then
8
attach the front cover to the EV Wall Business to close it.
Only the B cable should be connected to one of the B ports on the LED
board. Do not attach anything to the A port and RJ45 port of the LED board.
9 Create a user account for the customer and share the
location with this new username. Write the username,
password and email address in the Quick Starter Guide
Lock
(included in the box together with this Quick Install
Guide) and hand it to your customer. This user account
can be used for the Smappee App and Dashboard and
to set smart charging schedules.