Important - Super Ego 1500000447 Mode D'emploi

Important

This manual contains information required for safe
use of this equipment.
1. Ensure that the user receives a copy of this
manual.
2. Keep this manual in a location where the
operator can easily consult it whenever necessary.
3. Before using the socket welding device,
read this manual carefully and follow the
instructions and advice it contains.
4. Take care to comply with the Safety Measures
described in this manual, to avoid accidents
such as fires, electric shock and other injuries.
It is essential that the personnel that use this
equipment read and understand this manual.
5. Ensure that the persons that use this equipment
have the necessary attitudes and aptitudes.
6. Do not use the socket welding device in any
way except that described in this instruction
manual.
The equipment that you are about to use has been
Safety precautions
designed according to the latest techniques and
complies with applicable safety regulations.
Nevertheless, given its nature, its use is potentially
dangerous. To avoid accidents, observe the safety
instructions given in this manual.
These safety instructions are indicated in this manual
by the following icons.
Indicates situations that can lead to death or severe
DANGER
injury for the user.
Indicates risk situations that can lead to injuries or
PRECAUTION
damage to property.
NOTE
Indicates advice that can help to produce the best
results, and other information.
− Please pay attention to these warnings,
since they are important for safe use of the
equipment.
− If this instruction manual is lost or damaged,
request a replacement immediately from
our representative.
− Components and specifications are subject
to change without prior notice, in order
to improve the quality or operation of
the equipment or to comply with safety
regulations. In this case, the photographs
and illustrations, etc., in this manual may not
correspond to the product supplied.
10
Safety advice
DANGER
1. Ensure that the voltage supply is correct. The
correct voltage is indicated on the name plate
of the main unit or in the instruction manual.
If the wrong voltage is used, this may cause
overheating, smoke or fire.
2. The unit should only be connected to the mains
supply and used for welding once the unit is
attached to the workbench using the G-Clamp.
The legs of the unit should only be used to
handle the unit when cold until it is held firmly
in place with the G-clamp and connected to the
mains supply.
3. Never touch the mains plug with wet hands.
4. Ensure that the unit is installed in a suitable
location. Do not use this equipment in the rain,
in damp or wet locations, or in locations where
water could easily enter the unit. Never use it
in the vicinity of inflammable liquids or gases,
such as petrol or turpentine. This could cause
fires or explosions.
5. Only use the
attachments.
attachments other than those specified in
the instruction manual or in our catalogue,
otherwise, accidents or injuries could be
produced.
6. If any anomaly is detected, such as strange
smells, vibrations or noises, turn the unit off
immediately. Do not attempt to disassemble
the unit. In case of problems, contact our local
representative or distributor.
7. Keep the workplace clean and tidy. Ensure that
the workbench and the work area are kept
in perfect condition and well lit. Untidy work
areas or workbenches cause accidents.
8. Do not allow unauthorised personnel to
have access to this equipment. Do not allow
unauthorised persons to handle the unit or to
have access to the power lead. Do not allow
unauthorised persons into the workplace,
especially children.
9. Do not overload the equipment. Use it only
according to its design conditions.
10. Use proper clothing. Do not work wearing a
tie, loose or "floppy" clothing, accessories such
as necklaces, etc.
11. Do not work in uncomfortable positions. Keep
well balanced with firm footing, to avoid falls
and injuries.
12. Take great care when using this equipment.
Always pay
Carelessness can cause accidents and injuries.
Never use this equipment when you cannot
ENGLISH
specified accessories
Never use accessories
attention while
and
or
working.