Installation - FAJARDO RONDA Mode D'emploi

CLOSE THE DOOR AFTER LOADING THE STOVE. THIS STOVE HAS NOT BEEN
-
DESIGNED TO BE USED WITH THE DOOR OPEN.
DO NOT RAISE THE FIRE TO THE HEIGHT OF THE GRATE. THE FIRE MUST BE
-
MADE IN THE HEARTH.
DO NOT OVERHEAT. IF ANY PARTS OF THE STOVE OR THE CHIMNEY TURN RED,
-
THIS MEANS THERE IS OVERHEATING.
In order to ensure the correct operation of the stove, the installation must be
carried out by following the instructions given in this manual.
The stove must be placed in a well-ventilated area, which should have at least one
window. This will help to distribute the hot air between the different areas in the
home.
The connection pipes should have a diameter of 6 inches and both these and the
stove must be kept at a distance from inflammable material.
Do not install the stove on an inflammable floor. If this is not possible, a metal or
ceramic plate (fireproof) must be placed under the stove. This must cover the
surface of the heater and protrude 8 inches (203mm) on the sides and the opening
of the ash box and 16 inches (406mm) on the front. Under the connection of the
chimney, a projection of 2 inches (50.8mm) on either side will be necessary.

INSTALLATION

8