Repeat Mode; Bluetooth Operation - Roadstar TSPK-990CDBT Manuel D'instructions

3 English
Repeatedly press ID3 (23 on remote) to show the following informations:

file/album/song/artist.

REPEAT MODE

During playback, repeatedly press REPEAT 1 (9 on remote) to select: The
current track is played repeatedly.
During playback, repeatedly press REPEAT ALL (9 on remote) to select: All
tracks are played repeatedly.
CD PROGRAMMING
You can program up to 20 tracks to play in any desired order.
1. Insert a disc and press STOP (4) (5 on remote) when it starts playing.
2. Press PROG (6 on remote). "P01" will be shown on the display.
3. Press SKIP -/+ (5) (7 on remote) to select your favorite tunes.
4. Press PROG (6 on remote) to store the track in the program memory.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press PLAY/PAUSE (3) (4 on remote) to start program play.
7. Press STOP (4) (5 on remote) once to stop the program play. Press
STOP (4) (5 on remote) twice to clear programme.
AUX-IN
This unit provides an auxiliary audio input jack and RCA for connecting ex-
ternal audio device like MP3 players, CD players and allow playback of
your external source through the system speakers.
1. Use an audio cable (not included) with a 3,5mm plugs or RCA on one
end of the cable. Plug one end into the AUX-IN jack on the main unit
and plug the other end of the cable into the LINE OUT or HEADPHONE
Jack of your external audio device.
2. Turn ON the unit and your external audio device. Select AUX mode
using FUNCTION SELECTOR (2) (2 on remote).
3. Start to play the external device (see the user manual of the external
device).

BLUETOOTH OPERATION

1. Select BT mode using FUNCTION SELECTOR (2) (2 on remote).
2. Select from your portable device (Smartphone, Tablet...) the ID Blue-
tooth tagged as TSPK-990CDBT, then confirm connection.
3. When the pairing is successful the LCD will stop blinking.
4. Now you can transfer the music to the TSPK-990CDBT and all opera-
tions can only be operated from your mobile device.