Silver Marine Calypso 360 AL Manuel D'instruction page 9

3. Install AL board-3, 4
Install the aluminium floor boards by following the picture instructions below
Start by fitting the back board to the
rear end. Lift the other side a little to
make space for the last board.
4. Side Stringers Assembly
There are 4 sturdy aluminium side stringers that hold the floor boards in one piece and keep the boards
steady.
Put one stringer on to fit the angle between each board and the buoyancy chambers. Complete the
second stringer assembly by repeating the process.
NOTE: Do not rest the completed boards on the inflated hull material.
5. Install Seating Board
When the air deck is in position, hook the plastic brackets at the bottom of the plywood bench into the
PVC straps on your Silver Marine® boat.
All manuals and user guides at all-guides.com
1
3
Push down the 2 boards at the joint
part.
2
Connect the last board to the back of
board 1, lift the other side and connect
to the rear board's lifted side.
7