Step Three: Finish Inflation; Step Four: Oar Assembly; Step Five: Self-Bailing Drain Valve - Silver Marine Calypso 360 AL Manuel D'instruction

All manuals and user guides at all-guides.com
6. Seat bag assembly
After the Seat Assembly, attach the bench seat bag onto the bench seat.
7. Install front storage bag.

STEP THREE: FINISH INFLATION

After inflating the tubes, insert the barometer against the valve. Check if the pressure in the air cham-
bers reaches 0.25 bars, then remove the barometer and screw the cap on.

STEP FOUR: OAR ASSEMBLY

Press down the button on one end of the oar and then insert another blade end. Then fully fit the oar into
the fixed holders on both sides of buoyancy tubes.

STEP FIVE: SELF-BAILING DRAIN VALVE

Push the plug into sleeve located in the transom.
Note: Always make sure the plug is secured into the valve before launching the boat and do not open
while afloat.
8