COMMISSIONING THE DEVICE
1.
Fill the device with warm or cold water until the marked filling line at the inside has been reached.
Place the device on a level surface and insert the mains plug in a socket.
2.
Sit comfortably in front of the device and set the desired function using the function switch (A).
Function switch:
=
=
=
=
•
Select the FOOT SPA & MASSAGE & HEAT & RED LIGHT setting to stimulate your feet by means of the
massage nub function (D) at the bottom of the device and switch on additional heat and an energising foot
spa. The red light field (F) is also active and provides pleasant warmth.
•
The FOOT SPA & HEAT setting only activates the foot spa and heat function.
•
The MASSAGE & RED LIGHT activates the massage function by means of the massage nubs (D) as well as
the red light field (F). This setting can also be used without water.
3. After the application, set the function switch (A) to the O (OFF) position. Pull out the mains plug from the
socket and empty the foot spa if necessary.
Additional massage application
The Promed FB-100 foot spa offers you, in addition to the already described application options, another
massage option using water, but without activating the device. The massage roller (E): Roll with your soles
over the massage roller with an intensity that is pleasant for you. This encourages the blood flow and has an
energising effect on your feet.
Additional pedicure top parts
Using the Promed FB-100 foot spa, you can also use one of three supplied pedicure top parts at a time.
Position the desired pedicure top part in the pedicure top part place (G). The two pedicure top parts which are
not needed can be stored on the pedicure top part holder (C). Now rub your feet at the top part in the pedicure
top part place (G) by applying gentle pressure. Do not apply too much a pressure. You can "work" the desired
part of your foot by changing the position of your foot.
•
Using the brush (H), you can stimulate the reflex zones in your sole.
•
The massage brush (I) provides you with a pleasant massage and encourages the blood flow.
•
The horny skin remover (J) is used to gently remove dead skin cells and horny skin.
Note!
The dead skin particles can be removed particularly easily using the horny skin remover after a foot spa when
the skin is very soft.
OFF
MASSAGE & RED LIGHT
FOOT SPA & HEAT
FOOT SPA & MASSAGE & HEAT & RED LIGHT
DE
EN
FR
IT
ES
NL
RU
PL
SE
AR