Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

KMA 41MF
Multi-Function Environment Meter
Forefront of show window
*Hospital
Sickroom, Warehouse
Medical Examination room
Operation room
Emergency Treatment
*School
Auditorium, Indoor Gymnasium
Class room
Laboratory Library Drafting room,
Measuring Humidity/Temperature
1.Humidity Measurement:
⑩ Set the function Switch to "%RH" position.
⑪ Then the display will show the humidity reading value
(%RH) directly.
⑫ When the tested environment humidity value changed. It
need to a few minutes to get the stable "%RH" reading.
Warning:
Don't expose the humidity sensor to direct sunlight.
Don't touch or manipulate the humidity sensor.
2.Temperature Measurement:
Set the function Switch to "TEMP"
Press Select Button: Selects "0.1℃ or 1℃ and 0.1℉ or 1℉"
range.
Then the display will show the environment temperature
1500 ~ 3,000
100 ~ 200
300 ~ 750
750 ~ 1,500
100 ~ 300
200 ~ 750
500 ~ 1,500
9
reading value (℃/℉) directly.
Insert the temperature probe into the K-type thermocouple
socket.
Touch the end of the temperature sensor to the area or
surface of the object to be measured. The display will show
the temperature reading value (℃/℉) directly.
Warning:
When function switch on temperature "0.1℃ or 1℃ and 0.1℉ or
1℉"range, Never attempt a voltage measurement with the test leads
inserted into the K-type thermocouple socket.
You might be injured or damage the meter.
6. MAINTENANCE

Battery Replacement

If the sign "BAT" appears on the LCD display, it indicates that the
battery should be replaced. Open the battery case and replace the
exhausted battery with new battery. (1 x 9V battery NEDA 1604, 6F22
or equivalent)
10
www.grupotemper.com

Publicité

Table des Matières
loading

Table des Matières