Cord Management For Storing Unit; Troubleshooting; Accessories - Oreck Edge Guide D'utilisation

Trouble-
shooting

Accessories

Cord Management for Storing Unit

1. Bundle cord and slide strap around cord and secure.
1.
If the following troubleshooting tips do not resolve the problem
please contact Oreck Customer Service.
U.S.: 1-800-989-3535
Important! Always unplug and allow the vacuum to cool down
before conducting any troubleshooting. See safety warnings.
Problems
Cleaner will
not run
Vacuum will
not pick up
or has low
suction
Tools/Wands
will not stay
together
Replacement Disposable Filter Bags,
12 pack
Replacement HEPA Filter
10
Canada: 1-888-676-7325
Possible Source
Not plugged in
properly.
No electricity in
wall outlet.
Needs service.
Hose/wand tool is
clogged.
Bag is full.
Proper friction
fit not being
obtained.
Part
.
Areas to Check
Be sure cleaner is
firmly plugged into
wall outlet.
Check electrical
source - fuse or circuit
breaker.
Take to service center
or call for nearest
service center.
Remove obstructions.
Replace Bag.
Push and turn.
Number
PKCC12DW
49003-01