Important - VR46 E-MOBILITY UP! Manuel D'utilisation

Charging method 2
• Remove the battery to open the silicone charging port, connect the charger DC plug to the battery
charging port; connect the power cable to the charger, then connect the other port to the outlet (100
V-240 V; 50/60 Hz) and check that the charger indicator is switched on normally.
• Cover the charging port with the dust cap in case metal is likely to come into contact with the charging
port and cause a short circuit at the end of the charging port.

IMPORTANT

porta di ricarica
The device is usually delivered partially charged. However, we recommend
charging it for 6 to 8 hours before using it for the first time.
We also recommend charging it after each use and before storing it.
Do not allow the scooter to discharge completely as this may damage the
battery.
interfaccia della
batteria
12