ALPATEC PR3MBE 1500 Mode D'emploi page 10

All manuals and user guides at all-guides.com
notice PR3MBE 28/03/07
- To select HIGH mode, press again MODE touch. The timer is set on 4 hours. To modify selected time,
press + or – touch ( from 1 hour to 16 hours). If you select 0h, the appliance stops automatically a few
seconds later.
HIGH
22°C
TIME 4H
- To select AUTO mode, press again MODE touch. Set desired temperature by pressing + or – touch.
To use timer, press TIMER touch. Set desired time by pressing + or – touch. If you select 0h, the
appliance stops automatically a few seconds later.
To cancel timer function, press MODE touch until reselect AUTO mode.
AUTO
22°C 7°C
- To stop the appliance, press ARRET touch.
If you did not use the appliance for a long time, turn the power switch to 0 position and unplug the
appliance.
SETTING OF THE TIME OF START
Press MODE button and choose the operating mode.
Press down buttons MODE and TIMER simultaneously for few seconds. Then the heater stops working and
displays the time of start.
Press + and – buttons to set the time: from 1h to 8h. When it reaches the set time of start, the heater will
automatically be restored to the operating mode set and starts to heat.
TIME 8H
TO CANCEL TIMER
Press MODE button, and the appliance starts immediately.
Press On/off button (1) and the appliance is off.
• Before any cleaning or maintenance operation, switch off and unplug the appliance.
Ensure it is perfectly cooled.
• To remove the dust, wipe your appliance with a cloth.
• Never use abrasives or detergents.
15:58 Page 10
TIMER
TIMER
MAINTENANCE
MAINTENANCE
10