UBERHAUS DESIGN 38115077 Guide De L'utilisateur page 6

Fig.7: Insert top connector (M) into the middle of the top crossbeam, then fasten it with spring fastener.
Fig.8: Insert top connector (L) into the middle of the top crossbeam (N).
Fig.9:
Insert slanting beam(I) and straight beam(J) into top crossbeam (N) and top crossbeam（M） .
Fig.10: Insert slanting beam（I）into the middle of the top crossbeam (N).
Hardware Pack 3
EE
FF
Φ8x180 stake
plastic loop
16 PCS
104 PCS