Getting Started - Anker Nebula Solar Mode D'emploi

EN

Getting Started

1. Placement
Place this device on a stable, flat surface, and squarely point it to face the projection
surface. For best results, the projection surface should be white and flat. The distance
between this device and the projection surface must be a minimum of 30 inches (0.8
meters) and a maximum of 120 inches (3.18 meters) to get a projection image from 30
to 120 inches.
• It is unnecessary to tilt it towards the projection surface. You can
T
• The distance between the device and the projection surface
• You can also mount your projector on the ceiling.
There is a nameplate on the back panel of Nebula Solar / Nebula Solar Portable. Open
the nameplate to use it as a stand. After use, close the nameplate.
07
correct the projection image with the built-in keystone correction.
determines the projection image size. For the best result, set the
projector between 63 and 104 inches away.