Table Des Matières; Description; Safety; Purpose Of This Manual - Greenlee Gator Intelli-PUNCH Manuel D'instructions

Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Important Safety Information ..................................... 3-5
Identification and Illustration .......................................... 6
Specifications ................................................................. 6
Setup and Operation .................................................. 7-8
Capacity ......................................................................... 9
Maintenance ................................................................. 10
Troubleshooting ............................................................ 11

Description

The Greenlee Intelli-PUNCH™ Battery-Hydraulic
Knockout Driver is a hand-held, self-contained knockout
driver intended to be used with Greenlee punches,
dies, and drawstuds for punching holes through mild
steel, stainless steel, brass, copper, aluminum,
fiberglass, and plastics.
This tool is designed to be used with the following
Greenlee accessories:
• Standard punches, dies, and drawstuds
• Slug-Buster punches, dies, and drawstuds
®
• Slug-Splitter punches, dies, and drawstuds
®
• SPEED PUNCH
®
• Electronic connector panel punches
• Special shape punches, dies, and drawstuds
("D", Double "D", Key, Square, Rectangular, and
Oiltight with notches)
Standard and Slug-Buster, Electronic Connector Panel
Punches, and special shape punches can punch holes
through mild steel, brass, copper, aluminum, fiberglass,
and plastics, with limited stainless steel capability.
Slug-Splitter punches, dies, and drawstuds are capable
of punching through all of these materials and are
optimized for stainless steel. Refer to the "Capacity"
section in this manual for detailed information on
maximum driver rating. Do not exceed the rated
capacity of the punch or driver.
This tool is protected by U.S. Patent No. 6,276,186,
6,401,515, 7,086,979, and 7,254,982.
Greenlee Tools, Inc.
1.800.561.8187
Knockout System
KEEP THIS MANUAL
www.
Intelli-PUNCH

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.

Purpose of this Manual

This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
Intelli-PUNCH™ Battery-Hydraulic Knockout Driver
Keep this manual available to all personnel.
Replacement manuals are available upon request at
Do not discard this product or throw away!
All specifications are nominal and may change as design
improvements occur. Greenlee Tools, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Kwik-Stepper, Slug-Buster, Slug-Splitter, and SPEED PUNCH
are registered trademarks and Intelli-PUNCH™ is a trademark of
Greenlee Tools, Inc.
2
information@itm.com
.com
Knockout Driver
™