Installing The Monitor - Krautli RVS 401 Mode D'emploi

Installing the Monitor

●Open the locking screw and adjust the monitor to desired viewing angle.
Locking
Suction cup base
Now tighten the locking screw to secure the monitor.
screw
●Clean the area of the windshield or dashboard where you would like to
attach the suction cup base. Now press the suction cup base onto the
windshield or dashboard and move the locking lever toward the suction
cup base.
Monitor swivels
●Connect the monitor cable with the car charger cable.
Locking lever
●Now plug the car charger into the vehicle's outlet (12V-24V). Place the
monitor cable so as not to impact or jeopardize the safety of the vehicle
and its passengers.
Caution!
The location of the monitor may not impair the visibility of the driver! Further, do not impair the functionality and operation of equipment,
control units and systems inside the vehicle. Follow applicable laws and safety regulations for vehicles!
6