Main Operations; Vertical Steaming - EFFEKTIV TURBOSTEAM COMPACT 3000X Manuel De L'utilisateur

the iron until the water tank is empty. Do this at least once before using your
iron for the first time or if you have not used it for some time.

MAIN OPERATIONS

1. Getting started. Fill the water tank up to the "MAX" level and plug the
appliance into an electrical outlet. The LCD will display "STEAM IRON"
while the iron is in standby mode.
2. Mode selection. You need to select one of 5 temperature settings, de-
pending on the type of fabric you are going to iron/steam.
Press "+" to the left of the handle for the first time; this is the minimum
temperature for Nylon -type fabrics - ECO mode
Press "+" twice; this is for silk fabric types
Press "+" three times and the screen will display the settings for wool
Press "+" four times; this is for cotton fabric types
Press "+" five times; the screen will display the settings for linen
is the maximum mode).
When the temperature starts to rise, the T icon will flash on the screen.
When the temperature reaches the selected level, the steaming icon
will show which means that you can use the steaming function. Then,
press the steam button and begin steaming.
Steam won't be produced if the temperature has not reached the set level.
3. Temperature setting. Press the "-" on the right side of the knob to set a
lower temperature. The T icon will flash on the screen when the tem-
perature starts decreasing.
4. Steam output. Please note that the higher the temperature setting, the
greater the steam output is. The maximum steam output is about 450
mg/min.
VERTICAL STEAMING FUNCTION
As a rule, vertical steaming is used for oversized garments, curtains, and
6
EN
(this