Service And Support - Fastback 20 Mode D'emploi

FIGURE 34
FIGURE 35
FIGURE 36
XIII
SERVI CE AN D SU PP ORT
SD Card Replacement
Software upgrades will be available from time to time
and are easily installed by replacing the SD card. To install
the latest features follow these steps:
1. Turn the machine Off. Open the top cover until the
latch engages, holding it in the up position.
2. Remove the metal strip from the front underside of
the cover by removing its two screws. (fi gure 34)
3. Gently push in the card protruding from the thin slot
until it disengages and then remove it. (fi gure 35 and
fi gure 36)
4. Slip in the new card until it is secure and then
replace the front metal strip and close the cover. You
now have the newest features installed!
If a problem persists after you have read this manual
and have followed the troubleshooting procedures
outlined, please call your authorized Fastback®
representative. You may also call Fastback Technical
Support at 510.848.2463 (or 800.321.2463 in the United
States) during the hours of 6:00 a.m. to 4:00 p.m.,
Pacifi c Standard Time. They are also available via email:
techservice@powis.com.
FASTBACK MODEL 20 USER'S MANUAL 208714 - REVB00
45