Connecting The Dr56C To The Car Radio; Setting The Fm Transmitter Frequency; Connecting To The Car Radio Via Audio Cable; Adjusting The Volume - Albrecht DR 56 C Guide D'instructions

4. Connecting the DR56C to the car radio

You can either send the audio signal via FM transmitter or
transmit it directly with the 3.5mm audio cable via the Aux out
(audio out) output to your car radio.

4.1. Setting the FM transmitter frequency

• Press the FREQ button and then rotate the ◄► knob
until you find the desired free frequency.
• The transmission frequency is displayed at the top of the
screen as TX frequency (e.g. „TX107.0Mhz").
• The DAB+ station name will be transmitted via RDS to
your car radio (if supported by your radio)
Please note: "Free frequency" means that no FM station
and no interference signals are transmitted on the selected
frequency.

4.2. Connecting to the car radio via audio cable

Plug the supplied 3.5mm audio cable into the AUX OUT
•
socket of the DR56C and into the line-in socket of your car
radio.
Please note: As soon as a plug is inserted in the AUX OUT
socket, transmission via FM transmitter is switched off!

4.3. Adjusting the volume

Press and hold the MODE knob. A volume bar appears on the
display. You can now adjust the volume.
28