Testing Procedure - METRADO Gluceofine Manuel Utilisateur

Testing Procedure

Step 1
The meter must be turned OFF before inserting the test strip.
Firmly insert the test strip into the meter test port. Insert down rmly in di-
rection of arrow on test strip(arrow up). Please do not insert the test strip
upside down. When you insert the test strip into the meter, the power au-
tomatically turns on with the code and temperature. After a while the
code number and testing temperature will disappear. When the strip sign
blinks, apply your blood to the test port of strip.
CAUTION
1. If the code is not displayed after for a while, pull the blood glucose test strip
out of the port, and re-start the procedure from the beginning.
2. If the code on the LCD display window and on the test vial does not match, try
another new blood glucose test strip. If the mismatch persists, please contact
your local representative for help.
3. If the blood glucose test meter does not power on, pull the blood glucose test
strip out of the port, and re-insert the blood glucose test strip.
4. Avoid testing under direct sunlight, for a more accurate test result.
5. If you apply your blood sample too early, Er5 message will appear on LCD
( refer to page 81).
67